Tuttnauer ELARA11-D, Technicial Manual

Page: 85 / 176

Page 84
2. Change the parameter as desired .
Cool Exhaust Rate
This parameter defines how quickly the pressure will go down during exhaust
after cooling.
1. Browse to the following folder:
Cycle parameters\Cool Mode\Cool Exhaust Rate
2. Change the parameter as desired .
9.20
Exhaust
This menu defines parameters for the exhaust stage.
Exhaust Mode
The Exhaust mode parameter equals:

1 for fast exhaust in the end,

2 for slow exhaust in the end plus opening the fast exhaust when the
pressure equals 30 kPa above the ambient pressure,

3 for slow exhaust opened during the entire cycle,

4 for BH exhaust mode (see BH cycles explanation).
You can set this parameter and thereby change the exhaust mode.
Browse to the following folder:
Cycle parameters\Exhaust\Exhaust Mode
Change the parameter as desired .
9.21
Drying
This menu defines parameters for the drying stage.
www.shanghaidelan.com 021-54263653