Tuttnauer ELARA11-D, Technicial Manual

Page: 84 / 176

Page 83
Sterilization Time
This parameter defines duration of the sterilization stage for the cycle.
3. Browse to the following folder:
Cycle parameters\ Sterilization\Sterilization Time
4. Change the parameter as desired .
9.19
Cooling (“C” models only)
This menu defines parameters for the cooling stage.
Cool Mode
If the setup of your model has the cooling option, and the cycle has the cooling
stage, the Cool mode parameter equals 1, otherwise it equals 0. You can set
this parameter as 0 or 1 therefore enabling or disabling the cooling option.
1. Browse to the following folder:
Cycle parameters\Cooling\Cool Mode
2. Change the parameter as desired .
Cool End Temperature
When the Cool end temperature is reached, the cooling stage is finished.
1. Browse to the following folder:
Cycle parameters\Cool Mode\Cool End Temperature
www.shanghaidelan.com 021-54263653