Tuttnauer ELARA11-D, Technicial Manual

Page: 121 / 176

Page 120
5. Remove the door switch from the autoclave.
6. Release nut (6) and unscrew the door switch (4) from the door switch
adapter (5).
7. Assemble the new door switch to the adapter. Verify that the wheel
protrudes (A) approx. 0.37"-0.38" (9.5-10mm) from the adapter (5) and
tighten nut (6).
8. Assemble the door switch with its adapter to the front panel. Do not
tighten the two screws (1).
9. Perform final adjustment of the microswitch using a GO-NO GO gauge
(P/N JIG411-0102) as follows:
9.1. Insert the GO side (8) of the gauge (11) between the wheel (7) of
the microswitch and the door locking hooks (9) while pressing the
gauge to the hooks. Verify that you hear a "click" indicating the
closing of the switch.
9.2. Insert the NO GO side (10) of the gauge (11) between the wheel
(7) of the microswitch and the door locking hooks (9) while
pressing the gauge to the hooks. Verify that you DO NOT hear
the "click" indicating the closing of the switch.
1 3
6
2 5
4
A
4
5
www.shanghaidelan.com 021-54263653