Tuttnauer ELARA11-D, Technicial Manual

Page: 87 / 176

Page 86
This parameter defines how long will the heating elements be off for the Dry
First Stage.
1. Browse to the following folder:
Cycle parameters\Drying\Dry Heat Off 1
2. Change the parameter as desired .
Note: There are Dry heat On 2 and Dry heat Off 2 parameters for the Dry
Second Stage of the drying.
Dry First Stage Time
This parameter defines duration of the Dry First Stage . The Dry Second Stage
time is calculated as Dry Time minus the Dry First Stage Time, that is why
there is no Dry Second Stage Time menu.
1. Browse to the following folder:
Cycle parameters\Drying\Dry First Stage Time
2. Change the parameter as desired .
Add Dry Time
This subdirectory allows you to change the Dry Time parameter for the current
cycle.
Browse to the following folder:
Cycle parameters\Drying\Add Dry Time
Change the parameter as desired.
9.22
Ending
This menu defines the End temperature parameter for the Ending stage.
End Temperature
This parameter defines the temperature when the cycle ends. The cycle will
not end and the door will not open unless the autoclave chamber is cooled
down to this temperature.
www.shanghaidelan.com 021-54263653