Tuttnauer ELARA11-D, Technicial Manual

Page: 54 / 176

Page 53
9.6
System Parameters
This menu is listing the system parameters that are the same for all cycles.
Browse to the following folder:
Main menu\System parameters
You will see the following screen:
Below is the instruction for changing the system parameters.
Print Rate All
In this menu you can define the time interval for printing out the cycle status,
for all the stages except sterilization: The default is 3 minutes. See the Printer
handling section of the Operation and maintenance manual.
Browse to the following folder:
System parameters\Print Rate All
Change the parameter as desired
Print Rate Sterilization
In this menu you can define the time interval for printing out the cycle status
during the sterilization stage: The default is 1 minutes.
Browse to the following folder:
System parameters\Print Rate Sterilization
www.shanghaidelan.com 021-54263653