Tuttnauer ELARA11-D, Technicial Manual

Page: 40 / 176

Page 39
9 Checking and Changing
Parameters And Other Data
Bacsoft control panel allows changing parameters of the cycle and of the
system, exporting various data to, and importing from, a USB device or to the
printer, and some other options.
Cycle parameters are changeable for Custom programs only (see Duplicate
cycles), with the exception of the Temperature sensors, Displayed inputs, and
Dry Time.
9.1
Browsing through the menus
Now you will learn how to browse through the folders. When you read the
Directories and subdirectories chapter with links to specific menus, you will
need to know how to browse through the folders using the autoclave control
panel. Below is the instruction.
Login as Technician (see 10.7). The Main menu screen appears. To browse
through the menus:
1. Press the Up and Down keys to scroll through the menus.
2. Press the Start/Stop key to enter the next screen (i.e. to get one level
down).
3. Repeat steps 1 and 2 to enter the next screen until you get to required
screen.
Below are the example screens for the following menu:
Cycle Parameters\
Drying\ Dry Time:
www.shanghaidelan.com 021-54263653