Tuttnauer ELARA11-D, Technicial Manual

Page: 117 / 176

Page 116
10.27
Replacing the Plastic Handle Cover
Caution!
Before starting, ensure that there is no pressure in the autoclave.
Allow the autoclave to cool before replacing the Door Handle Cover.
Do not disconnect the electric power, since disconnecting the power will
lock the handle and prevent replacement of the handle cover.
1. Open the autoclave's door.
2. Open the handle and release the two screws (1).
3. Slide the handle cover out from the door. It might be tight, but it will slide.
4. Transfer the two screws (2) from the rear of the old cover to the new
cover and tighten so as to provide a snug fit when the cover is slid back
into the slots on the metal bracket.
5. Inserted screws (1) in the cover until two threads are above the cover's
surface.
6. Now insert the cover into the handle bracket.
7. Now with the cover in position tighten the two front screws (1).
www.shanghaidelan.com 021-54263653