Tuttnauer ELARA11-D, Technicial Manual

Page: 91 / 176

Page 90
9.25
Draining the Reservoirs
(Applies to the clean-water reservoir and to the waste-water
reservoir)
1. To drain the reservoir, use item (5) with the plastic hose (6)
attached to it (supplied with the autoclave).
2. Insert part (5) into valve (3) and press it until you hear a
“click”. The drain valve is open.
3. When the water reservoir is empty, press part (4). Item (5) will
pop out approx. 3mm and the drain valve will be closed.
Remove item (5) with the plastic tube.
4. If the drained reservoir is the clean-water reservoir, fill
reservoir with distilled water until it reaches the full level.
(approximately 6.5 liters (1.72 gallons)).
The autoclave is now ready for use.
Press in this direction
to release the drain hose
4 5
Press this direction
to close drain valve
3 6
No. description
1 Clean water drain
2 Waste water drain
www.shanghaidelan.com 021-54263653