Tuttnauer ELARA11-D, Technicial Manual

Page: 89 / 176

Page 88
2. Change the parameter as desired).
Multiple Cycles
This parameter allows you to repeat, for testing purposes, the same cycle
several times without reloading the autoclave. The number or repetitions is
defined by this parameter.
1. Browse to the following folder:
Cycle parameters\Global\Multiple Cycles
2. Set the parameter as desired .
Multiple Cycles Gap
This parameter allows you set the time interval between the multiple cycles
(see above).
1. Browse to the following folder:
Cycle parameters\Global\Multiple Cycles Gap
2. Change the parameter as desired .
Jacket Temperature
This parameter defines the temperature of the jacket (for the relevant models
only). The system is not ready unless the jacket reaches this temperature.
1. Browse to the following folder:
Cycle parameters\Global\Jacket Temperature
2. Change the parameter as desired
www.shanghaidelan.com 021-54263653