Tuttnauer ELARA11-D, Technicial Manual, Page: 34 / 176

Page 33

Track the parameter settings that have been used in each of the
cycles and stages run.

Choose the style of the report to view; either graph, table, or a print
out

All reports can be saved as a PDF.

The graph style report offers the user an option to customize the
inputs and outputs used in the presentation.
For more information on the R.PC.R refer to the R.PC.R user guide.

The printer is an optional device. It prints the detailed history of each
cycle performed by the autoclave. The printing is on thermal paper
with 24 characters per line and records the sterilization cycle
information for subsequent consideration.
7.2
Displayed Error Messages / Symbols
An error message is displayed when a failure occurs. The failures are divided
into two categories
.
1. Failures that occur before completing the sterilization stage, which in
this case will leave the load unsterilized
2. Failures that occur after completing the sterilization stage, which in this
case will leave the load sterilized
For the list of Displayed Error Messages / Symbols
see 12.
7.3
Displayed operational messages / Symbols
Operational messages tell you the status of the machine before or after a cycle.
Message / Symbol
Name
Message / Symbol
Description
Required Action
This symbol is displayed
when the door is open.
Close the door.
"Door is open"
(during stand by)
This message is
displayed when the door
is opened: In stand by-if
START/STOP is preset.
Close the door to perform
a new cycle.
"Cycle Ended"
This message is
displayed when the cycle
ended successfully. Press START/STOP in
order to perform a new
cycle.
"Test Ended"
This message is
displayed when the test
ended. Press START/STOP in
order to perform a new
test
www.shanghaidelan.com 021-54263653