Tuttnauer ELARA11-D, Technicial Manual

Page: 4 / 176

Page 3
9.21 Drying 84
9.22 Ending 86
9.23 Global (for some models only) 87
9.24 Preliminary Operations for Each Technician Call 89
9.25 Draining the Reservoirs 90
9.26 Safety tests after repair 91
10
Maintenance and Replacement Procedures 92
10.1 Preliminary Operations for Each Technician Call 92
10.2 Dismantling the Outer Cover of the Autoclave 92
10.3 Emergency Door Opening 93
10.4 Replacing the jacket heating elements 95
10.5 Replacing the PT100 Temperature Sensor and cut –off thermostat of
the jacket heater 96
10.6 Replacing the Water Reservoir Water Electrodes 97
10.7 Replacing the Drain Valves 97
10.8 Replacing the water filling pipe. 99
10.9 Replacing the Door Cover 99
10.10 Replacing the door safety microswitch 100
10.11 Replacing the main switch 101
10.12 Replacing the Air Filter 102
10.13 Replacing the circuit breaker 102
10.14 Replacing the Door Safety Microwitch (“Door switch”) 104
10.15 Replacing the Solid State Relay (SSR) 105
10.16 Replacing the Transformer. 106
10.17 Replacing the fuse of the transformer 106
10.18 Replacing the Safety Valve 107
10.19 Replacing the steam generator heating elements 108
10.20 Replacing the steam generator cut-off thermostat 109
10.21 Replacing and cleaning the generator’s water level electrode 110
10.22 Replacing the Drain Valve 111
10.23 Replacing the door gasket 111
10.24 Replacing the Front Panel 113
10.25 Replacing the Printer Door 114
10.26 Replacing the Door Handle 115
www.shanghaidelan.com 021-54263653