Tuttnauer ELARA11-D, Technicial Manual

Page: 23 / 176

Page 22
Check the water reservoir, piping, plastic parts and electric
wires.
Check and tighten the piping joints to avoid leakage.
Check and tighten all screw connections in the control
box, heaters and valves and instrumentation.
Calibrate the temperature and pressure once a year or in
reference to local rules or regulations (refer to the section
on Calibration).
5 years Observe the closing device for excessive wear
Check the door gasket
Safety tests (pressure vessel, efficiency, electrical) shall be
performed in accordance with local rules or regulations, by an
authorized inspector.
Only an authorized technician shall perform the 6-months and
yearly tests!
www.shanghaidelan.com 021-54263653