164
Privilege Requirement
None.
Example
Display the configurations of all Ethernet ports and LAGs:
T1600G-52TS(config)# show interface configuration
Display the configurations of port 1/0/2:
T1600G-52TS(config)# show interface configuration gigabitEthernet
1/0/2
19.16
show storm-control
Description
The
show storm-control
command is used to display the storm-control
information of Ethernet ports.
Syntax
show storm-control
interface
[
gigabitEthernet
port-list
]
[
port-channel
lagid-list
]
Parameter
port-list
——
The list of Ethernet ports.
lagid-list
—— The list of LAGs.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the storm-control information of port 1/0/4-7:
T1600G-52TS(config)#
show storm-control interface gigabitEthernet
1/0/4-7
19.17
show bandwidth
Description
The
show bandwidth
command is used to display the bandwidth-limit
information of Ethernet ports.
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...