150
Example
Configure the link-local address as fe80::1234 on the VLAN interface 1:
T1600G-52TS(config)# interface vlan
1
T1600G-52TS(config-if)# ipv6 address
fe80::1234
link-local
18.4
ipv6 address dhcp
Description
The
ipv6 address dhcp
command is used to enable the DHCPv6 Client
function. When this function is enabled, the Layer 3 interface will try to obtain
IP from DHCPv6 server. To delete the allocated IP from DHCPv6 server and
disable the DHCPv6 Client function, please use
no ipv6 address dhcp
command.
Syntax
ipv6 address dhcp
no ipv6 address dhcp
Configuration Mode
Interface Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable the DHCP Client function on VLAN interface 1:
T1600G-52TS(config)# interface vlan
1
T1600G-52TS(config-if)# ipv6 address dhcp
18.5
ipv6 address ra
Description
This command is used to configure the interface’s global IPv6 address
according to the address prefix and other configuration parameters from its
received RA(Router Advertisement) message. To disable this function, please
use
no ipv6 address ra
command.
Syntax
ipv6 address ra
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
