205
Example
Bind the PoE profile named “IP Camera” to port 2:
T1600G-52PS(config)# interface gigabitEthernet
1/0/2
T1600G-52PS(config-if)# power inline profile
“IP Camera”
25.12
power inline time-range
Description
The
power inline time-range
command is used to bind a PoE time-range to
the corresponding port. To cancel the bind relation, please use
no power
inline time-range
command.
Syntax
power inline time-range
name
no power inline time-range
Parameter
name
—— The name of the PoE time-range to be bound to the port.
Command Mode
Interface Configuration Mode
Example
Bind the PoE time-range named “tRange2" to port 2:
T1600G-52PS(config)# interface gigabitEthernet
1/0/2
T1600G-52PS(config-if)# power inline time-range
tRange2
25.13
show power inline
Description
The
show power inline
command is used to display the global PoE
information of the system.
Syntax
show power inline
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...