86
12.3
show ip dos-prevent
Description
The
show ip dos-prevent
command is used to display the DoS information of
the detected DoS attack, including enable/disable status, the DoS Defend
Type,
the count of the attack, etc.
Syntax
show ip dos-prevent
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the DoS information of the detected DoS attack globally:
T1600G-52TS(config)#show ip dos-prevent
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
