94
T1600G-52TS(config)# show logging local-config
13.11
show logging loghost
Description
The
show logging loghost
command is used to display the configuration of
the log host.
Syntax
show logging loghost
[
index
]
Parameter
index
——The index of the log host whose configuration will be displayed,
ranging from 1 to 4. Display the configuration of all the log hosts by default.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the configuration of the log host 2:
T1600G-52TS(config)# show logging loghost
2
13.12
show logging buffer
Description
The
show logging buffer
command is used to display the log information in
the log buffer according to the severity level.
Syntax
show logging buffer
[
level
level
]
Parameter
leve
l —— Severity level. There are 8 severity levels marked with values 0-7.
The information of levels with priority not lower than the select level will
display. Display all the log information in the log buffer by default.
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
