121
Privilege Requirement
None.
Example
Display the security configuration of all ports:
T1600G-52TS(config)# show mac address-table max-mac-count
Display the security configuration of port 1/0/1:
T1600G-52TS(config)# show mac address-table max-mac-count interface
gigabitEthernet
1/0/1
16.12
show mac address-table interface
Description
The
show mac address-table interface
command is used to display the
address configuration of the specified port/LAG.
Syntax
show mac address-table interface
{
gigabitEthernet
port
|
port-channel
lagid
}
Parameter
port
——
The Ethernet port number.
lagid
——
The ID of the LAG.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the address configuration of port 1/0/1:
T1600G-52TS(config)# show mac address-table interface gigabitEthernet
1/0/1
16.13
show mac address-table count
Description
The
show mac address-table count
command is used to display the total
amount of MAC address table.
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
