TP-Link T1600-28TS, Cli Reference Manual

Page: 203 / 365

187
Parameter
access-list-num
—— ACL ID, ranging from 0 to 499.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Create a MAC ACL whose ID is 23:
T1600G-52TS(config)# mac access-list 23
24.3 access-list standard
Description
The access-list standard command is used to add Standard-IP ACL rule. To
delete the corresponding rule, please use no access-list standard command.
Standard-IP ACLs analyze and process data packets based on a series of
match conditions, which can be the source IP addresses and destination IP
addresses carried in the packets.
Syntax
access-list standard
acl-id
rule
rule-id
{ deny
|
permit } [[ sip
source-ip
]
smask
source-ip-mask
] [[ dip
destination-ip
] dmask
destination-ip-mask
]
no access-list standard
acl-id
rule
rule-id
Parameter
acl-id
—— The desired Standard-IP ACL for configuration.
rule-id
—— The rule ID.
deny —— The operation to discard packets.
permit ——The operation to forward packets. It is the default value.
source-ip
—— The source IP address contained in the rule.
source-ip-mask
—— The source IP address mask. It is required if you typed
the source IP address.
destination-ip
—— The destination IP address contained in the rule.
destination-ip-mask
—— The destination IP address mask. It is required if you
typed the destination IP address.