TP-Link T1600-28TS, Cli Reference Manual

Page: 277 / 365

261
router-time
—— Router Port Time. Within this time, if the switch does not
receive MLD query message from the router port, it will consider this port is
not a router port any more. Router Port Time ranges from 60 to 600 in
seconds. By default, it is 0 and the global router-time will be used.
member-time
—— Member Port Time. Within this time, if the switch does not
receive MLD report message from the member port, it will consider this port
is not a member port any more. Member Port Time ranges from 60 to 600 in
seconds. By default, it is 0 and the global member-time will be used.
port-list
—— The list of Ethernet ports.
lagid
—— The ID of the LAGs.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Enable Multicast VLAN 3, and configure Router Port Time as 100 seconds,
Member Port Time 100 seconds, and Static Router Port port 1/0/3:
T1600G-52TS(config)# ipv6 mld snooping multi-vlan-config 3 rtime 100
T1600G-52TS(config)# ipv6 mld snooping multi-vlan-config 3 mtime 100
T1600G-52TS(config)# ipv6 mld snooping multi-vlan-config 3 rport
interface gigabitEthernet 1/0/3
28.13 ipv6 mld snooping multi-vlan-config
(router-ports-forbidden)
Description
This command is used to forbid the specified ports as being router ports in
the specified multicast VLAN. To delete the forbidden router ports, please
use
no ipv6 mld snooping multi-vlan-config router-ports-forbidden
command.
Syntax
ipv6 mld snooping multi-vlan-config [
vlan-id
] router-ports-forbidden
interface { gigabitEthernet port-list | port-channel port-channel-id }