316
32.7
interface port-channel
Description
This
interface port-channel
command is used to create the port-channel
interface. To delete the specified port-channel interface, please use the
no
interface port-channel
command.
Syntax
interface port-channel
{
port-channel-id
}
no interface port-channel
{
port-channel-id
}
Parameter
port-channel-id
—— The ID of the port-channel interface, ranging from 1 to
14.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Create the port-channel interface 1:
T1600G-52TS(config)# interface port-channel
1
32.8
ip route
Description
This
ip route
command is configure the static route. To clear the
corresponding entry, please use the
no ip route
command.
Syntax
ip route
{
dest-address
} {
mask
} {
next-hop-address
}
[
distance
]
no ip route
{
dest-address
} {
mask
} {
next-hop-address
}
Parameter
dest-address
—— The destination IP address.
mask
—— The subnet mask.
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
