119
16.8
show mac address-table
Description
The
show mac address-table
command is used to display the information of
all address entries.
Syntax
show mac address-table
[ dynamic | static | filtering ]
Parameter
dynamic | static | filtering —— The type of your desired entry. By default all
the entries are displayed.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the information of all address entries:
T1600G-52TS(config)# show mac address-table
16.9
clear mac address-table
Description
The
show mac address-table
command is used to clear the specified
address entries.
Syntax
clear mac address-table
{ dynamic | static | filtering }
Parameter
dynamic | static | filtering —— The type of your desired entry.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
