246
Parameter
start-ip
—— The start filtering multicast IP address.
end-ip
—— The end filtering multicast IP address.
Command Mode
Profile Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure one of the filter multicast address entry as range 225.1.1.1 to
226.3.2.1 in profile 1:
T1600G-52TS(config)# ip igmp profile
1
T1600G-52TS(config-igmp-profile)#range
225.1.1.1 226.3.2.1
27.24
ip igmp filter
Description
The
ip igmp filter
command is used to bind the specified profile to the
interface. To delete the binding, please use
no ip igmp filter
command.
Syntax
ip igmp filter
profile-id
no ip igmp filter
Parameter
profile-id
—— Specify the profile ID, ranging from 1 to 999.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet / interface port-channel / interface range port-channel)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Bind profile 1 to interface gigabitEthernet 1/0/2:
T1600G-52TS(config)# interface gigabitEthernet
1/0/2
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
