286
Enable VLAN-created trap only for the switch:
T1600G-52TS(config)# snmp-server traps vlan
create
29.12
rmon history
Description
The
rmon history
command is used to configure the history sample entry. To
return to the default configuration, please use
no rmon history
command.
RMON (Remote Monitoring), basing on SNMP architecture, functions to
monitor the network. History Group is one of the commonly used RMON
Groups. After a history group is configured, the switch collects network
statistics information periodically, based on which the management station
can monitor network effectively.
Syntax
rmon history
index
interface gigabitEthernet
port
[
interval
seconds
]
[
owner
owner-name
] [
buckets
number
]
no rmon history
index
Parameter
index
—— The index number of the entry, ranging from 1 to 12, in the format
of 1-3,5.
port
——The Ethernet port number.
seconds
—— The interval to take samplings from the port, ranging from 10 to
3600 in seconds. By default, it is 1800.
owner-name
—— The owner of the history sample entry, ranging from 1 to 16
characters. By default, it is “monitor”.
number
—— The maximum number of buckets desired for the RMON history
group of statistics, ranging from 1 to 130. The default is 50 buckets.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Configure the sample port as Gi1/0/2 and the sample interval as 100 seconds
for the entry 1-3:
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...