TP-Link T1600-28TS, Cli Reference Manual

Page: 251 / 365

235
no ip igmp snooping vlan-config
vlan-id-list
[ rtime
router-time
| mtime
member-time
| rport interface { gigabitEthernet
port-list
| port-channel
lagid
} ]
no ip igmp snooping vlan-config
vlan-id-list
static
ip
interface
{ gigabitEthernet
port-list
| port-channel
lagid
}
Parameter
vlan-id-list
—— The ID list of the VLAN desired to modify configuration,
ranging from 1 to 4094, in the format of 1-3, 5.
router-time
—— Router Port Time. Within this time, if the switch does not
receive IGMP query message from the router port, it will consider this port is
not a router port any more. Router Port Time ranges from 60 to 600 in
seconds. By default, it is 0 and the global router-time will be used.
member-time
—— Member Port Time. Within this time, if the switch does not
receive IGMP report message from the member port, it will consider this port
is not a member port any more. Member Port Time ranges from 60 to 600 in
seconds. By default, it is 0 and the global member-time will be used.
port-list
—— The list of Ethernet ports.
lagid
—— The ID of the LAGs.
ip —— The static multicast IP address.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable the IGMP Snooping function and modify Router Port Time as 300
seconds, Member Port Time as 200 seconds for VLAN 1-3, and set the router
port as 1/0/1 for VLAN 1-2:
T1600G-52TS(config)# ip igmp snooping vlan-config 1-3 rtime 300
T1600G-52TS(config)# ip igmp snooping vlan-config 1-3 mtime 200
T1600G-52TS(config)# ip igmp snooping vlan-config 1-2 rport interface
gigabitEthernet 1/0/1
Add static multicast IP address 225.0.0.1, which corresponds to VLAN 2, and
configure the forward ports as ports 1/0/1-3: