303
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable the LLDP-MED feature for port 1/0/2:
T1600G-52TS(config)# interface gigabitEthernet
1/0/2
T1600G-52TS(config-if)# lldp med-status
30.10
lldp med-tlv-select
Description
The
lldp med-tlv-select
command is used to configure LLDP-MED TLVs to
be included in outgoing LLDPDU for the corresponding port. To exclude
LLDP-MED TLVs, please use
no lldp med-tlv-select
command. By default, All
TLVs are included in outgoing LLDPDU.
Syntax
lldp med-tlv-select
{ [inventory-management]
[location]
[network-policy]
[power-management] [all]
}
no lldp med-tlv-select
{ [inventory-management]
[location]
[network-policy]
[power-management] [all]
}
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Exclude “network policy” and “inventory” TLVs in LLDPDU outgoing from port
1/0/2:
T1600G-52TS(config)# interface gigabitEthernet
1/0/2
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
