TP-Link T1600-28TS, Cli Reference Manual

Page: 219 / 365

203
Parameter
consumption —— The max power the port in the profile can supply. There are
six options: “power-limit”, “auto”, ”class1”, “class2”, “class3” and “class4”.
“power-limit” indicates you can manually enter a value. It ranges from 1 to 300.
The value is in the unit of 0.1 watt. For instance, if you want to configure the
max power as 5w, you should enter 50. “auto” indicates the value is assigned
automatically by the PoE switch. “class1” represents 4w. “class2” represents
7w. “class3” represents 15.4w. “class4” represents 30w.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Example
Configure the power limit as “5w” for port 2:
T1600G-52PS(config)# interface gigabitEthernet 1/0/2
T1600G-52PS(config-if)# power inline consumption 50
25.9 power inline priority
Description
The power inline priority command is used to configure the PoE priority for
the corresponding port
Syntax
power inline priority { low | middle | high }
Parameter
priority ——The PoE priority of the port. The priority levels include “high”,
“middle” and “low” in descending order. When the supply power exceeds the
system power limit, the PD linked to the port with lower priority will be
disconnected. By default, the priority level is “low”.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Example
Configure the PoE priority as “low” for port 2:
T1600G-52PS(config)# interface gigabitEthernet 1/0/2
T1600G-52PS(config-if)# power inline priority low