332
Syntax
aaa group
{ radius | tacacs }
group-name
no aaa group
{ radius | tacacs }
group-name
Parameter
radius | tacacs —— Specify the server group type as RADIUS or .
group-name
—— Specify the server group name.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Create a RADIUS server group with the name radius1:
T1600G-52TS(config)# aaa group
radius radius1
34.7
server
Description
This
server
command is used to add the existing server in the defined server
group. To remove the specified server from the server group, please use the
no server
command.
Syntax
server
ip-address
no server
ip-address
Parameter
ip-address
—— Specify the server’s IP address.
Command Mode
Server Group Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Create the RADIUS server 1.1.1.1 to RADIUS server group “radius1”:
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
