225
26.23
show spanning-tree active
Description
The
show spanning-tree active
command is used to display the active
information of spanning-tree.
Syntax
show spanning-tree active
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the active information of spanning-tree:
T1600G-52TS(config)# show spanning-tree active
26.24
show spanning-tree bridge
Description
The
show spanning-tree bridge
command is used to display the bridge
parameters.
Syntax
show spanning-tree bridge
[ forward-time | hello-time | hold-count | max-age
| max-hops | mode | priority | state ]
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the bridge parameters:
T1600G-52TS(config)# show spanning-tree bridge
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
