106
Parameter
supplicant-timeout
time
——The maximum time for the switch to wait for the
response from supplicant before resending a request to the supplicant.,
ranging from 1 to 9 in second. By default, it is 3 seconds.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the supplicant’s timeout value as 5 seconds:
T1600G-52TS(config)#dot1x timeout supplicant-timeout
5
15.8
dot1x max-reauth-req
Description
The
dot1x max-reauth-req
command is used to configure the maximum
transfer times of the repeated authentication request when the server cannot
be connected. To restore to the default value, please use
no dot1x
max-reauth-req
command.
Syntax
dot1x max-reauth-req
times
no dot1x max-reauth-req
Parameter
times
—— The maximum transfer times of the repeated authentication
request, ranging from 1 to 9 in times. By default, the value is 3.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
