102
T1600G-52TS(config)#dot1x system-auth-control
15.2
dot1x handshake
Description
The
dot1x
handshake
command is used to enable the handshake feature.
The handshake feature is used to detect the connection status between the
TP-Link 802.1x supplicant and the switch. Please disable the handshake
feature if you are using a non-TP-Link 802.1x-compliant client software. This
feature is enabled by default.
Syntax
dot1x handshake
no dot1x handshake
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Disable the 802.1X handshake function:
T1600G-52TS(config)# no dot1x handshake
15.3
dot1x auth-method
Description
The
dot1x auth-method
command is used to configure the Authentication
Method of IEEE 802.1X and the default 802.1x authentication method is “eap”.
To restore to the default 802.1x authentication method, please use
no
dot1x
auth-method
command.
Syntax
dot1x auth-method
{ pap | eap }
no dot1x
auth-method
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
