84
Chapter 12
DoS Defend Commands
DoS (Denial of Service) Attack is to occupy the network bandwidth maliciously by the network
attackers or the evil programs sending a lot of service requests to the Host. With the DoS
Defend enabled, the switch can analyze the specific field of the received packets and provide
the defend measures to ensure the normal working of the local network.
12.1
ip dos-prevent
Description
The
ip dos-prevent
command is used to enable the DoS defend function
globally. To disable the DoS defend function, please use
no ip dos-prevent
command.
Syntax
ip dos-prevent
no ip dos-prevent
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable the DoS defend function globally:
T1600G-52TS(config)#ip dos-prevent
12.2
ip dos-prevent type
Description
The
ip dos-prevent type
command is used to select the DoS Defend Type.
To disable the corresponding Defend Type, please use
no ip dos-prevent
type
command.
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
