98
14.4
ip ssh timeout
Description
The
ip ssh timeout
command is used to specify the idle-timeout time of SSH.
To restore to the factory defaults, please use
no
ip ssh timeout
command.
Syntax
ip ssh timeout
value
no ip ssh timeout
Parameter
value
—— The Idle-timeout time. During this period, the system will
automatically release the connection if there is no operation from the client. It
ranges from 1 to 120 in seconds. By default, this value is 120 seconds.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Specify the idle-timeout time of SSH as 30 seconds:
T1600G-52TS(config)# ip ssh timeout
30
14.5
ip ssh max-client
Description
The
ip ssh max-client
command is used to specify the maximum number of
the connections to the SSH server. To return to the default configuration,
please use
no ip ssh max-client
command.
Syntax
ip ssh max-client
num
no ip ssh max-client
Parameter
num
—— The maximum number of the connections to the SSH server. It
ranges from 1 to 5. By default, this value is 5.
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
