204
25.10
power inline supply
Description
The
power inline supply
command is used to configure the PoE status of the
corresponding port.
Syntax
power inline supply
{ enable | disable }
Parameter
enable | disable —— The PoE status of the port. By default, the PoE status is
“enable”.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Example
Enable the PoE feature for port 2:
T1600G-52PS(config)# interface gigabitEthernet
1/0/2
T1600G-52PS(config-if)# power inline supply
enable
25.11
power inline profile
Description
The
power inline profile
command is used to bind a PoE profile to the
corresponding port. To cancel the bind relation, please use
no power inline
profile
command.
Syntax
power inline profile
name
no power inline profile
Parameter
name
—— The name of the PoE profile to be bound to the port. If the name
being assigned contains spaces then put it inside double quotes.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
