92
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Disable logging to the terminal devices:
T1600G-52TS(config)# no logging monitor
13.8
logging monitor level
Description
The
logging monitor level
command is used to limit messages logged to the
terminal devices. System logs no higher than the set threshold level will be
displayed on the terminal devices. To restore the threshold level to default
value, please use
no logging monitor level
command.
Syntax
logging monitor level
level
no logging monitor level
Parameter
level
—— Severity level of the log information output to the terminal devices.
There are 8 severity levels marked with values 0-7. The smaller value has the
higher priority. Only the log with the same or smaller severity level value will
be output to the terminal devices. By default, it is 5 indicating that all the log
information between level 0-5 will be output to the terminal devices.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Set the severity level as 7:
T1600G-52TS(config)# logging monitor level
7
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
