172
20.7
show qos interface
Description
The
show qos interface
command is used to display the configuration of
QoS based on port priority.
Syntax
show qos interface
[
gigabitEthernet
port-list
]
[
port-channel
lagid-list
]
Parameter
port-list
——
The list of Ethernet ports.
lagid-list
—— The list of LAGs.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the configuration of QoS for all ports and LAGs:
T1600G-52TS#
show
qos interface
Display the configuration of QoS for ports 1/0/1-4:
T1600G-52TS#
show
qos interface gigabitEthernet
1/0/1-4
20.8
show qos cos-map
Description
The
show qos cos-map
command is used to display the configuration of IEEE
802.1P Priority and the mapping relation between cos-id and tc-id.
Syntax
show qos cos-map
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the configuration of IEEE 802.1P Priority and the mapping relation
between cos-id and tc-id:
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
