307
Example
Display the neighbor information of Gigabit Ethernet port 1/0/1:
T1600G-52TS#show lldp neighbor-information
interface gigabitEthernet
1/0/1
30.16
show lldp traffic interface
Description
The
show lldp traffic interface
command is used to display the LLDP
statistic information between the local device and neighbor device of the
corresponding port. By default, the LLDP statistic information of all the ports
will be displayed.
Syntax
show lldp traffic interface
[
gigabitEthernet
port
]
Parameters
port
—— The Ethernet port number
.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the LLDP statistic information of Gigabit Ethernet port 1/0/1:
T1600G-52TS#show lldp traffic interface gigabitEthernet
1/0/1
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
