113
16.2
mac address-table aging-time
Description
The
mac address-table aging-time
command is used to configure aging
time for the dynamic address. To return to the default configuration, please
use
no mac address-table aging-time
command.
Syntax
mac address-table aging-time
aging-time
no mac address-table aging-time
Parameter
aging-time
—— The aging time for the dynamic address. The value of it can
be 0 or ranges from 10 to 630 seconds. When 0 is entered, the Auto Aging
function is disabled. It is 300 by default.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the aging time as 500 seconds:
T1600G-52TS(config)# mac address-table aging-time
500
16.3
mac address-table filtering
Description
The
mac address-table filtering
command is used to add the filtering
address entry. To delete the corresponding entry, please use
no mac
address-table filtering
command. The filtering address function is to forbid
the undesired package to be forwarded. The filtering address can be added
or removed manually, independent of the aging time.
Syntax
mac address-table filtering
mac-addr
vid
vid
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
