227
Parameter
port
—— The Ethernet port number.
lagid
—— The ID of the LAG.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the protect information of all ports:
T1600G-52TS(config)# show spanning-tree interface-security
Display the protect information of port 1:
T1600G-52TS(config)# show spanning-tree interface-security
gigabitEthernet
1/0/1
Display the interface security bpdufilter information:
T1600G-52TS(config)# show spanning-tree interface-security bpdufilter
26.27
show spanning-tree mst
Description
The
show spanning-tree mst
command is used to display the related
information of MST Instance.
Syntax
show spanning-tree mst
{
configuration
[
digest
] |
instance
instance-id
[
interface
[
gigabitEthernet
port
|
port-channel
lagid
] ] }
Parameter
instance-id
—— Instance ID desired to show, ranging from 1 to 8.
port
—— The Ethernet port number.
lagid
—— The ID of the LAG.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
