TP-Link T1600-28TS Cli Reference Manual Download Page 252

Page: 252 / 365

236

T1600G-52TS(config)# ip igmp snooping vlan-config

static

225.0.0.1

interface gigabitEthernet

1/0/1-3

27.11

ip igmp snooping vlan-config

(router-ports-forbidden)

Description

This command is used to forbid the specified ports as being router ports in
the specified VLAN(s). To delete the forbidden router ports, please use

no ip

igmp snooping vlan-config

vlan-id-list

router-ports-forbidden

command.

Syntax

ip igmp snooping vlan-config

vlan-id-list

router-ports-forbidden interface

{

gigabitEthernet

port-list

port-channel

port-channel-id

}

no ip igmp snooping vlan-config

vlan-id-list

router-ports-forbidden

interface

[

gigabitEthernet

port-list

port-channel

port-channel-id

]

Parameter

vlan-id-list

—— The ID list of the VLAN desired to modify configuration,

ranging from 1 to 4094, in the format of 1-3, 5.

port-list

—— Forbid the specified ports as being router ports. Packets sent

from multicast routers to these ports will be discarded.

port-channel-id

—— Forbid the specified port-channels as being router ports.

Packets sent from multicast routers to these port-channels will be discarded.

Command Mode

Global Configuration Mode

Privilege Requirement

Only Admin, Operator and Power User level users have access to these
commands.

Example

Forbid the Ethernet ports 1/0/1-3 as being router ports in VLAN 1 :

T1600G-52TS(config)# ip igmp snooping vlan-config

router-ports-forbidden interface gigabitEthernet

1/0/1-3

Summary of Contents for T1600-28TS














































































































































































































































































































































































Search results

Summary of Contents for T1600-28TS

Reviews:

Related manuals for T1600-28TS

Brands by name

Popular brands

TP-Link T1600-28TS, Cli Reference Manual

Search results

Summary of Contents for T1600-28TS

Reviews:

Related manuals for T1600-28TS

Brands by name

Popular brands