47
7.7
show lacp
Description
The
show lacp
command is used to display the LACP information for a
specified EtherChannel Group.
Syntax
show lacp
[
channel-group-num
] { internal
|
neighbor }
Parameter
channel-group-num
—— The EtherChannel Group number, ranging from 1 to
6. By default, it is empty, and will display the information of all LACP groups.
internal —— The internal LACP information.
neighbor —— The neighbor LACP information.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the internal LACP information of EtherChannel Group 1:
T1600G-52TS(config)# show lacp
1 internal
7.8
show lacp sys-id
Description
The
show lacp sys-id
command is used to display the LACP system priority
globally.
Syntax
show lacp sys-id
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
