3
© 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C
ADJUSTMENT
3 - 49
3.3.4
Adjustment of faint text
The faint text can be improved in the following codes.
<Adjustment Mode (05)>
<Procedure>
(1)
While pressing [0] and [5] simultaneously, turn the power ON.
(2)
Key in the codes to be adjusted and press the [START] button.
(3)
Key in the adjustment value. (To correct the value once keyed in, press the [CLEAR] button.)
(4)
Press the [ENTER] or [INTERRUPT] button to store the value in memory.
→
The equipment
goes back to the ready state.
(5)
For resetting the value, repeat step (2) to (4).
(6)
Let the equipment restart and perform the printing job.
(7)
If the desired image has not been attained, repeat step (1) to (6).
3.3.5
Upper limit value at Toner Saving Mode
The upper limit value is adjusted at the Toner Saving Mode.
<Adjustment Mode (05)>
<Procedure>
The procedure is the same as that of
P.3-46 "3.3.2 Gamma balance adjustment (Black Mode)".
Black mode
Color mode
Remarks
PS
PCL
XPS
PS
PCL
XPS
7340
7341
7342
8130
8131
8132
When the small characters or fine lines in a halftone
image are faint, they can be improved by increasing
the value to raise the density level.
Acceptable values: 0 to 8 (Default: 0)
Black mode
Color mode
Remarks
PS
PCL
XPS
PS
PCL
XPS
664-0
664-1
664-2
1055-0
1055-1
1055-2
The smaller the value is, the lighter the density of
image becomes.
Acceptable values: 0 to 255
