TERRY HARMONY 2 Series, Installation Instructions Manual

Page: 93 / 106

Harmony Series 2 Homelift - XH00200 Issue: D Page 93 of 106
Harmony Phone Kit (LH630)
The following needs to be done before the lift is panelled up.
Take a phone extension cable from the nearest phone socket in the property back to the
Powerpack.
Connect the Blue & White and the Single Blue wires to spare trailing cables (TC2 – White &
Black), using a connector block (Blue to White & Single Blue to Black).
At the sling end, connect the phone extension box to the sling board connector TB2.
Plug the phone in to test and then mount the phone as shown below.
Mirror Panel Assembly
Use the three dimples in
the mirror panel, to drill
two Ø5.5mm holes and
one ؽ” hole as shown.
Dill 2 x Ø5.5mm holes
Drill ؽ” hole
2 x CB063 – M5x16 csk slotted screw
(to fix telephone to panel)
CE520 – ؽ” Grommet
(to thread cables through)
Telephone
CW010 – M5 shakeproof washer
CN017 – M5 nut
(to secure telephone at
rear of mirror panel)