TERRY HARMONY 2 Series, Installation Instructions Manual

Page: 24 / 106

Harmony Series 2 Homelift - XH00200 Issue: D Page 24 of 106
IMPORTANT!
Line up edges of
slot in tray and tube
Ensure pre-drilled holes align
and fasten tube to tray with
taptites supplied.
Middle Tube
Middle Tube Tray
Fasten top of middle tube
to tray at ‘cam ramp’.
3. Fit lower control tube (LHG2030-STD Sling or LHG3022-Long Sling) and middle
control tube (LHG2025)
Note: This is just to check everything fits - these covers will need to be removed again
when installing the trailing cables.
Lower Tube
Lower
Control
Tube
Tray
Slots provide
adjustment if
required. Fix
with M4x8 pan
head taptites
once correctly
positioned.
Lower tube sits flush
to spreader plate and
‘ledges’ onto guide
base plate.
If necessary, cut
excess length off top of
Lower Tube ONLY.
There must be a fixing
at the point where lower
and middle tubes meet.
Redrill if necessary.