TERRY HARMONY 2 Series, Installation Instructions Manual

Page: 23 / 106

Harmony Series 2 Homelift - XH00200 Issue: D Page 23 of 106
Middle & Lower Control Tube/Tray Installation
2. Fit lower control tube tray (LHG2024-STD Sling or LHG3021-LONG Sling)
Align bottom
edge of tray
(chamfered),
with bottom
edge of
guide tab.
*Excess
length should
be cut off
TOP EDGE
ONLY.
x
Lower & middle trays should
butt up as illustrated.
x
If floor to floor is:
< 3020mm STD Sling or,
< 3650mm Long Sling
cut excess length off TOP
of lower tray.
1. Fit middle control tube tray (LHG2023)
Ledge
Detail
MIDDLE
TRAY
Ledge locates on aperture
Use remaining pilot holes,
in same way, to fix through
to guide tab.
Use tray pilot holes to drill
2 x 3.5mm holes into
aperture liner. Fix tray
using M4 x 8 pan head
taptites supplied (CF030).
Please note, STD Slings and Long Slings use the same Middle and Upper Control
Tubes/Trays. The Lower Control Tubes/Trays are the only items that differ.