Genie_TS_Series GigE Vision Camera
Technical Specifications
159
Molex Wire Cable Sets
CMD-25 to CMD-25 Cable Sets
CMD-25 to D-Sub Socket Cable Sets
18" 83424-9019
18" 83424-9057
18" 83424-9063
36" 83424-9020
36" 83424-9058
36" 83424-9064
72" 83424-9021
72" 83424-9059
72" 83424-9065
Power over Ethernet (PoE) Support
The Genie TS requires a PoE Class 0 or Class 3 (or greater) power source when not using a
separate external power source connected to pins 1 & 2 of the 25-pin Micro-D Connector.
To use PoE, the camera setup requires a powered computer NIC, or a powered Ethernet switch,
or an Ethernet power injector.
The Genie TS is protected and will not fail in the case of have both an external supply and PoE
connected at the same time.
If both supplies are connected and active, the Genie will use PoE as the camera power supply.
Video Iris Connector Details
Support for industry standard motorized C-Mount lenses.
The Genie TS Auto-Iris pinout supports both the Video and DC signal modes.
If a lens with a nonstandard Auto-iris pin out is used, the camera will:
Not suffer any internal component damage.
Continue operating without the lens.
Notify the user via an event message.
KOBICONN 163-158N-2-E connector
Iris Connector – Video Mode
Pin
Signal
Direction
Definition
1
LENS-PWR
Out
Lens Power (12V – 100mA)
2 RSV -
Reserved
3 LENS-VIDEO
Out
Lens
Video
4 LENS-GND
Out
Lens
Ground
