Genie_TS_Series GigE Vision Camera
Operational Reference
123
Acquisition and Transfer Control Feature Descriptions
The following table describes these parameters along with their view attribute and minimum
camera firmware version required. Additionally the Device Version column will indicate which
parameter is a member of the DALSA Features Naming Convention (denoted by DFNC), versus the
GenICam Standard Features Naming Convention (SFNC not shown).
The Device Version number represents the camera software functional group, not a firmware
revision number. As Genie TS capabilities evolve the device version tag will increase, therefore
identifying the supported function package. New features for a major device version release will be
indicated by
green text
for easy identification.
Display Name
Feature & Values
Description
Device Version
& View
AcquisitionMode
Set the acquisition mode of the device. It defines the
number of frames to capture during an acquisition
and the way the acquisition stops.
Single Frame
SingleFrame One frame is captured for each AcquisitionStart
Command. An AcquisitionStop occurs at the end of
the Active Frame.
Multi-Frame
MultiFrame A sequence of frames is captured for each
AcquisitionStart Command. The number of frames is
specified by AcquisitionFrameCount feature. An
AcquisitionStop occurs at the end of the Active
Frame(s)
Continuous
Continuous Frames are captured continuously with
AcquisitionStart until stopped with the
AcquisitionStop command.
1.00
Beginner
Acquisition Frame Count AcquisitionFrameCount
Number of frames to be acquired in MultiFrame
acquisition mode. (Maximum number of internal
frame buffers is 64k).
1.00
Beginner
Acquisition Arm Cmd
AcquisitionArm
Arms the device before an AcquisitionStart command.
This optional command validates all the current
features for consistency and prepares the device for a
fast start of the acquisition. If not used explicitly, this
command is automatically executed at the first
AcquisitionStart but will not be repeated for
subsequent ones unless a data transfer related
feature is changed in the device. (WO)
1.00
Guru
