48
Operational Reference
Genie_TS_Series GigE Vision Camera
Active
Active Activates the auto-brightness mode when the
AcquisitionStart or AcquisitionArm command is received.
Auto-Brightness Sequence
autoBrightnessSequence
Specifies the processing order for the auto-brightness
algorithm. Gain, Iris, and Exposure are adjusted
sequentially, in the selected order, to achieve the auto-
brightness target value. If the Iris, Gain, or Exposure
features are not available or disabled, that feature is
ignored in the processing sequence.
< DFNC Expert >
V1.10 - all
all
all
Exposure \ Gain
Exposure_Gain_Iris Adjust Exposure, Gain, Iris, in that order to achieve the
auto-brightness target value.
Gain \ Exposure
Gain_Exposure_Iris Adjust Gain, Exposure, Iris, in that order, to achieve the
auto-brightness target value.
Auto-Brightness Target Source
autoBrightnessTargetSource
Specifies the source image color plane(s) used by the
Auto-Brightness algorithm to determine the brightness
adjustment required to obtain the auto-brightness target
value.
< DFNC Expert >
V1.10 - all
all
Luminance
Luminance The luminance or Y component of the image is used as
the auto-brightness target source.
all
Raw Bayer Pattern
RawBayerPattern The Raw Bayer Pattern of the image is used as the auto-
brightness target source.
—
Auto-Brightness Target
autoBrightnessTarget
Sets the target image grayscale value, in DN, for the
auto-brightness algorithm. Features that use auto-
brightness include ExposureAuto, GainAuto, and
IrisAuto.
< DFNC Expert >
V1.10 - all
all
all
Auto-Brightness Target
Variation
autoBrightnessTargetRangeVariation
Sets the auto-brightness target Range Variation in (DN).
An autoBrightnessTarget value within this range is
considered valid and will not be compensated.
< DFNC Expert >
V1.10 - all
all
all
Auto-Brightness Algorithm
autoBrightnessAlgorithm
Specifies the auto-brightness algorithm used to calculate
the brightness in the target image source plane(s).
< DFNC Expert >
V1.10 - all
Average
Average The auto-brightness algorithm calculates the average
luminance from the camera image and determines if the
brightness should increase or decrease based on the
requested target brightness.
all all
Histogram Windowing
HistogramWindowing The auto-brightness algorithm calculates the histogram
in every image from the camera and determines if the
brightness should increase or decrease based on the
requested target brightness.
V1.11 – STD
V1.20 - JPG
—
Auto-Brightness Histogram
Windowing Lower Boundary
autoBrightnessAlgoHistogram
WindowingLowerBoundary
Specify the lower area boundary (in percent) of the
histogram data range, used to reach the target value.
< DFNC Expert >
V1.10 – STD
V1.11 – STD
—
Auto-Brightness Histogram
Windowing Upper Boundary
autoBrightnessAlgoHistogram
WindowingUpperBoundary
Specify the upper area boundary (in percent) of the
histogram data range, used to reach the target value.
< DFNC Expert >
V1.10 – STD
V1.11 – STD
—
