Teledyne TS-C2500, User Manual

Page: 14 / 191

12

Genie TS Series Overview Genie_TS_Series GigE Vision Camera
Camera Specifications Overview
Camera Controls
Synchronization Modes Free running, External triggered, Software trigger through Ethernet
Exposure Modes Programmable in increments of 1µs
minimum (in µs) is model specific
maximum is 16 seconds
Pulse controlled via Trigger pulse width.
Trigger Inputs Opto-isolated, 2.4V to 24V typical, 16mA min.
Debounce range from 0 up to 255 µs
Trigger Delay from 0 to 2,000,000 µs
Strobe Outputs Output opto-isolated:
Aligned to the start of exposure with a programmable delay, duration and polarity
(using “start of exposure on output line source” feature)
Auto-Iris Control 4-pin auto-iris connector compatible with common DC and video iris lens.
Features
Flat Field Correction 2 Factory FFC plus 2 User Defined FFC (Standard Design Firmware)
3x3 Kernel Sharpening Filter 4 Predefined Selections (Monochrome models with Standard Design Firmware)
LUT 4 LUT available (monochrome models), 1 LUT (color models)
Binning Digitally based: Horizontal (2 and 4 pixel) and Vertical (2 and 4 line)
(monochrome models)
Gain Analog (analog gain steps are model dependent) and Digital gain up to 4x
Counter and Timer 1 Counter, and 1 Timer.
User programmable, acquisition independent, with event generation.
Timestamp 1µs internal timer or external signal to timestamp images and events
Metadata Support Also know as Chunk Data Support in SFNC
Test image Internal generator with choice of static and shifting patterns, or user defined patterns
uploaded with the file access feature
User settings Select factory default or either of two user camera configurations
Onboard Memory
Minimum Reserved Data Buffer 256 MB
Reserved Packet Resend Buffer 24 MB default (user defined feature)
Reserved Private User Buffer 4 kB
Total Memory 512 MB
Back Focal Distance
M42 x 1 mount models 12 mm
M42 to Nikon F bayonet adapter 46.5 mm (34.5 mm for the F mount adapter plus 12 mm for the camera body)
M42 to C-Mount adapter
17.52 mm (5.52 mm for the C mount adapter plus 12 mm for the camera body)
CS-mount models 12.52 mm (17.52 mm with a CS to C-mount adapter ring)
Mechanical Interface
Camera Size 49(H) x 49(W) x 54(L) in mm, see “ Mechanical Specifications ” on page 153
Mass 196 g (no lens)
Power connector via 25-pin Micro-D connector, or RJ45 in PoE mode
Ethernet connector RJ45