Genie_TS_Series GigE Vision Camera
Operational Reference
139
GevSCPSDoNotFragment GevSCPSDoNotFragment
This feature state is copied into the "do
not fragment" bit of IP header of each
stream packet. (RO)
1.00
Invisible
Gev SCPS BigEndian
GevSCPSBigEndian
Endianess of multi-byte pixel data for this
stream. (RO)
1.00
Invisible
TLParamsLocked TLParamsLocked
Flag
to indicate if features are locked
during acquisition.
1.00
Invisible
Defaults for devicePacketResendBufferSize
The default minimum for devicePacketResendBufferSize allows at least one maximum sized buffer
+ chunk data in memory.
The formula is:
packetResendBufferSizeMax = (Backend Frame Buffer Memory) – ((SensorWidth *
SensorHeight * pixelSize) + maxChunkDataSize).
The value allowed to change dynamically is pixelSize. The values SensorWidth and SensorHeight
are used because the Width and Height values can change if binning is used or even while
grabbing.
Device UPnP Auto-Discovery Mode Details
The Genie TS supports UPnP Network Auto-Discovery (
Universal Plug and Play
), thus allowing other
devices on the network to find and access the Genie TS without the Genie TS Framework installed.
This section describes the Windows configuration required for UPnP Auto-Discovery, accessing the
Genie TS web page and file access to user accessible memory on the camera.
Enable Windows Network Discovery
These instructions apply to Windows 7:
Go to
Control Panel\All Control Panel Items\Network and Sharing Center\Advanced
sharing settings
.
Windows shows a menu to configure options for each network profile available on that
computer.
Most systems used with the Genie TS will have a second NIC for the camera, therefore the
Public
profile needs to be configured. Expand the options view for
Public
.
Enable Network Discovery if it is off, then save your change.
